MaintenanceThis is a featured page

This section covers maintenance and troubleshooting of the tractor.
For maintenance of implements and attachments look under the heading in the Implements/Attachments section of this site.

Recalls/Warranty Fixes

[Collected by members of TBN.]

Items 1 - 4 are covered under warranty if and only if the issue actually occurs. So far less than 50% of the BX tractors we have sold have actually exhibited any symptoms and only about 10% on any one single issue. but most tractors shipped after December 2006 have been addressed.

1-Replacement battery cover frame (original doesn't fit properly) K2581-57134.

2-Grip Kit (Kubota part number:K2581-9557-0) Contains all the plastic handles and lever sleeves for the levers and knobs. Seems that they go on much tighter than the old ones.

3-Cluster kit: This is the dash cluster for all the gauges. The first design could accumulate moisture inside, or the hour meter may not work properly
BX1850 Part number K2501-6250-2
BX2350/24 Part number K2581-6250-2

4- Fender Kit: For the original fenders that had a tendency to break... Part number K2581-95522

Items 5 & 6 are campaign items are factory addressed if the serial number is above these.
BX1850 -step stay >54851 Seat Stopper >53774
BX2350 -step stay >62168 Seat stopper >57985
BX24 -step stay >55996 Seat stopper >56846

5-Step stay kit: These are the new brackets that support the floorboard. This is extremely heavy-duty. This has to eliminate any floorboard flex at all.
BX2350/1850 part number K2581-9554-0
BX24 Part number K2592-9554-0

6- Seat modification to correct earlier problem. Service Bulletin PIB-2007-027. For more info go to the seat page

Recalls

General Servicing and Checks

Servicing Your BX-Series Tractor (Oils, Filters, Etc.)
Checks to perform every 50 hours

Parts

Kubota Part Number Lookup (It can be slightly confusing, as you have to select a mower model even if you don't have one.)
Parts suppliers

The Broken Fender Fault

A common problem on early BX machines was the cracking of the plastic fender where the step meets the rear wheel arch. In more recent BXs Kubota has strengthened the component. For customers with the faulty fender, Kubota has been fixing under warranty or has shipped a reinforcing kit for machines that have not yet broken.

The common broken fender problem
What is Kubota doing about the broken plastic fenders?
Cracked Fenders/Battery cover


apmillard
apmillard
Latest page update: made by apmillard , Jan 18 2008, 5:44 PM EST (about this update About This Update apmillard Edited by apmillard


view changes

- complete history)
Keyword tags: maintenance
More Info: links to this page
Started By Thread Subject Replies Last Post
BrianWilhelm BX1850 jumps out of 4X4 2 Feb 10 2013, 3:16 PM EST by BrianWilhelm
Thread started: Feb 2 2013, 3:11 PM EST  Watch
My 1850 jumps out of 4 wheel drive. I have to hold the lever to keep it engaged. Is there a way to adjust this?
Do you find this valuable?    
Keyword tags: maintenance
Show Last Reply
mjym hi apmillard 1 Jan 10 2009, 4:05 PM EST by apmillard
Thread started: Jan 10 2009, 1:48 PM EST  Watch
very well done hope you will keep helping us with what you put on this site like the maintenance and all the other thing that we can look on thanks mario
Do you find this valuable?    
Keyword tags: None
Show Last Reply
Showing 2 of 2 threads for this page

Related Content

  (what's this?Related ContentThanks to keyword tags, links to related pages and threads are added to the bottom of your pages. Up to 15 links are shown, determined by matching tags and by how recently the content was updated; keeping the most current at the top. Share your feedback on WikiFoundry Central.)